SerenaSeat Wall-Mounted Shower Seat
Invisia’s spa-inspired wall-mounted SerenaSeat shower seat is both functional and beautiful. Designed for safety, the SerenaSeat conveniently folds against the wall, optimizing on space when it’s not in use. The moisture-resistant bamboo used for the seat provides a luxurious focal design that enriches any bathroom, giving your space a spa-like feel. With four colour options for the frame, there is plenty of selection to find a SerenaSeat that suits any taste! After mounting, the back rests can easily be removed for cleaning the wall behind the seat. And unlike other shower seats, the SerenaSeat is sustainable and environmentally friendly.
Supports up to 500lbs / 227kgs when installed to structural wood backing.
18” / 457mm, 26” / 660mm, and 32" / 813cm
Sustainable, hypoallergenic and naturally resistant to moisture, temperature and bacteria.
Slide backrest panels off of aluminum frame.
Mark off top hole location on one side of wall bracket, and notch tile with center punch.
Secure with appropriate fastener and waterproofing.
Slide bottom backrest panel onto frame and ensure it can easily slide between wall brackets. Ensure seat is level.
Mark off top hole location on other side of wall bracket, and notch tile with center punch.
Secure with appropriate fastener and waterproofing. Repeat steps 5-6 for 6 remaining holes.
Slide both backrest panels onto the wall brackets.
Inspect hardware regularly, and tighten if required.
|Finish/Colour||Frame: Chrome (-CRP), Brushed Nickel (-BN), Powder Coat Bronze (-ORB).|
Seat: Rubio Monocoat
|Weight Capacity||500lbs / 227kgs|
|Seat Width||18″ / 457mm (WS18), 26″ / 660mm (WS26), and 32″ / 813mm (WS32)|
|Seat Depth||15.75″ / 400mm from wall|
|Installation Mechanism||Must screw to wood backing behind wall|
|Installation Hardware/Fasteners||#10 x 3″ / 76mm length, stainless steel wood screws (x8).|
|Fasteners Exposed or Concealed||Concealed|
|Country of Origin||Canada|
|Shipping Dimensions||WS18: 21x18x4″ / 533x457x102mm|
WS26: 29x18x4″ / 737x457x102mm
WS32: 36x18x4″ / 914x457x102mm
|Shipping Weight||WS18: 16lbs / 7.3kgs|
WS26: 21lbs / 9.5kgs
WS32: 27lbs / 12.2kgs
|Warranty||Limited lifetime warranty|
Frequently Asked Questions
+ How do I clean the seat?
The back rests lift out to allow for cleaning of the wall behind seat. Clean seat with water and then wipe dry using a soft cloth. Do not use abrasive cleaning products (which can scratch the wood finish).
+ What is the seat finish?
Each slat is finished with Rubio Monocoat, an extremely durable 2-part natural oil finish that does not contain volatile organic compounds (VOCs) or other harmful chemicals.
+ Will the seat fade?
Through our tests, only contact with direct sunlight causes the seat to weather over time (similar to other woods).
+ Why does your seat support 500lbs/227kg without legs?
The design of the SerenaSeat frame with the installation into a secure structure allows for a weight capacity up to 500lbs/227kg.
Just bought and installed this shower seat for my daughter. It is perfection itself. Solid, quality workmanship and easily installed. She can't stop admiring it!
Donna in Nassau, Bahamas
Beautiful! Installed in a very small shower (32x36), set on the short wall at chair height. Folds down nicely and it’s a great space saver. Very classy and perfect for any age group.
Jaye in Columbus, OH
I searched everywhere for a good quality, nice looking, nonintrusive, and compact chair for my laundry room entryway that was easily opened and closed. This fit the bill perfectly.
Keith in Fort Mill, SC
It is great to sit on while I shave my legs and it conveniently folds up out of the way when I am through. The wooden back means I don't have to lean against the cold tile.