Offering just the right amount of assistance, this Soap Dish is much more than a stunning decorative feature. Not only does it provide a convenient place to store a bar of soap, it offers exceptional support and stylish design for ease of use and peace of mind. The dish itself is easy to remove, allowing for convenient cleaning, letting you keep your shower spotless with minimal effort.
Grab Bar Specialists
Grab Bars Canada
Supports up to 500lbs / 227kgs when installed to structural wood backing.
Makes mounting areas virtually invisible.
3 points of contact for maximum structural support.
Shatterproof tray resists the growth of mold and bacteria.
Back off set screws from rail sockets.
Allow wall stems to freely move in and out of rail sockets.
Peel label to expose sticker on back of wall stems.
With wall stems inside rail sockets, push the rail against the wall.
Firmly press the rail so stickers on back of wall stems contact wall.
Remove rail carefully so wall stems stay on the wall.
Each wall stem is located in relation to each other.
Using wall stems as locating guides, notch the tile with center punch.
Fasten the wall stems to the wall using appropriate fasteners and waterproofing.
Place rail back onto the fastened wall stems.
Secure rail by tightening set screws.
Inspect hardware regularly, and tighten if required.
|Finish/Colour||Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
|Tray Material||Solid surface material|
|Weight Capacity||500lbs / 227kgs (ADA Compliant)
Note: Reduced weight capacity if installed using hollow wall anchors.
|Rail Diameter||1.25″ / 31.8mm (ADA Compliant)|
|Wall Clearance||1.50” / 3.8cm (ADA Compliant)|
|Rail Width||12.10″ / 307mm|
|Rail Height||13″ / 330mm|
|Installation Mechanism||Must screw to wood backing behind wall. Hollow wall anchors can be used when no wood structure is available (Note: Reduced weight capacity).|
|Installation Hardware/Fasteners||Full Structure:#10 x 3″ / 76mm length, stainless steel wood screw (x3).
Hollow Walls (no structure): 3/16-24 x 3”/76mm length, stainless steel bolt and hollow wall anchors (x3).
|Fasteners Exposed or Concealed||Rail stems conceal mounting hardware.|
|Country of Origin||China|
|Shipping Dimensions||14x13x4″ / 356x330x102mm|
|Shipping Weight||5lbs / 2.3kgs|
|Warranty||Limited lifetime warranty|
Frequently Asked Questions
+ What is the weight capacity if I only have partial structure for mounting?
If there is partial structure for mounting (i.e. minimum one point fastens into structural wood and no structure available for other contact points), we recommend hollow wall anchors (supplied) for the contact points with no structure. This will reduce the weight capacity to 350lbs/159kg.
+ What is the weight capacity if I have no structure for mounting?
If there is no structure for mounting, we recommend hollow wall anchors (supplied) for all contact points. This will reduce the weight capacity to 200lbs/91kg.
+ How do I clean the soap dish tray?
The tray is made from a durable, non-porous, solid surface material that resists the growth of bacteria. It can be cleaned with general household cleaners.
+ What is the Limited Lifetime Warranty?
Products are covered by a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Warranty excludes products that have been damaged through misuse, accidental damage, alteration, normal wear and tear, wood material and stain, or the use of corrosive or abrasive cleaning products.
For more information, see the instructions.
We are retired folks, and in a new shower, my husband and I wanted something that would act as a grab bar without looking like one that escaped from a nursing home. This does the trick!
HWS in New England
This integrated bar and shower soap dish holder more than fits our requirement.
John in Fort Worth, TX
Love that this beautiful soap dish also serves as a sturdy rail next to the shower seat!