Toilet Roll Holder
This is a stunning addition for any bathroom, offering discreet support by the toilet, providing easy accessibility without sacrificing design and decor. This elegant design can support up to 500 pounds of weight when secured to mounting structures, making it an ideal and attractive safety accessory for any bathroom.
MSRP: Starting at $199
Supports upto 500lbs / 227kgs when installed to structural wood backing.
Makes mounting areas virtually invisible.
4 points of contact for maximum structural support.
Back off set screw from rail socket.
Remove wall stem from rail socket.
Peel label to expose sticker on back of wall stem.
Using wall stem as a locating guide, notch the tile with center punch.
Fasten the wall stem to the wall using appropriate fasteners and waterproofing.
Place rail onto the fastened wall stem.
Secure rail by tightening set screw.
Fasten bottom plate to the wall using appropriate fasteners and waterproofing.
Install plastic caps to conceal screws.
Install axle to hold toilet paper in place.
|Finish/Colour||Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
|Weight Capacity||500lbs / 227kgs (ADA Compliant)
Note: Reduced weight capacity if installed using hollow wall anchors.
|Rail Diameter||1.25″ / 31.8mm (ADA Compliant)|
|Wall Clearance||1.50″ / 38.1mm (ADA Compliant)|
|Rail Width||7.25″ / 184mm|
|Rail Height||13″ / 330mm|
|Installation Mechanism||Must screw to wood backing behind wall. Hollow wall anchors can be used when partial wood structure is available (Note: Reduced weight capacity).|
|Installation Hardware/Fasteners||Full Structure: #10 x 3″/76mm length, stainless steel wood screw (x1) and #10 x 2″/51mm length, stainless steel wood screw (x3).
Partial Structure: #10 x 3″/76mm length, stainless steel wood screw (x1) and #10 x 2″/51mm length, stainless steel wood screw (x1) and 3/16-24 x 3”/76mm length, stainless steel bolt and hollow wall anchors (x2).
|Fasteners Exposed or Concealed||Concealed; Rail stems conceal mounting hardware + Plastic caps (x3).|
|Country of Origin||China|
|Shipping Dimensions||14x9x4″ / 356x229x102mm|
|Shipping Weight||4lbs / 1.8kgs|
|Warranty||Limited lifetime warranty|
Frequently Asked Questions
+ How do I change the toilet roll?
Simply slide the pin out, position the roll and slide the pin back into place. The precision of the pin alignment makes this a quick and easy process.
+ What is the weight capacity if I only have partial structure for mounting?
If there is partial structure for mounting (i.e. minimum two centre points fastened into structural wood and no structure available for other contact points), we recommend hollow wall anchors (supplied) for the contact points with no structure. This will reduce the weight capacity to 350lbs/159kg.
+ What is the weight capacity if I have no structure for mounting?
If there is no structure for mounting, we do not recommend using hollow wall anchors.
Well made, attractive and just what we need for support in our new bathroom.
Elsie in Doylestown, PA
It's unique and beautiful- such a design statement that is really a stunning focal point to the shower and entire bathroom.