close button

Accent Ring

Invisia’s Accent Ring is a decorative grab bar that elegantly frames your shower valve while also providing unparalleled support. Designed to support a user weight capacity of up to 500lbs / 227kgs, the Accent Ring combines elegance with safety so you can experience peace of mind when you shower. One of our top-selling luxury bathroom accessories, the Accent Ring is perfect to hold onto when adjusting your water controls and simultaneously protects your fixture investments.

MSRP: Starting at $199

Shop Local

Shop Online

SUBU – Safer You. Better You.

Vintage Tub

Grab Bar Specialists


ADA Compliant

Supports up to 500lbs / 227kgs when installed to structural wood backing (see below for details).

Discreet wall stems with concealed screws

Makes mounting areas virtually invisible.

Multi-contact wall support

4 points of contact for maximum structural support.


Back off set screws from rail sockets.

Accent Ring Instructions

Allow wall stems to freely move in and out of rail sockets.

Accent Ring Instructions

Peel label to expose sticker on back of wall stems.

Accent Ring Instructions

With wall stems inside rail sockets, push the rail against the wall.

Accent Ring Instructions

Firmly press the rail so stickers on back of wall stems contact wall.

Accent Ring Instructions

Remove rail carefully so wall stems stay on the wall.

Accent Ring Instructions

Each wall stem is located in relation to each other.

Accent Ring Instructions

Using wall stems as locating guides, notch the tile with center punch.

Accent Ring Instructions

Fasten the wall stems to the wall using appropriate fasteners and waterproofing.

Accent Ring Instructions

Place rail back onto the fastened wall stems.

Accent Ring Instructions

Secure rail by tightening set screws.

Accent Ring Instructions

Inspect hardware regularly, and tighten if required.

Accent Ring Instructions


Material Stainless steel
Finish / Colour Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
Weight Capacity 500lbs / 227kgs (ADA Compliant)

Note: Reduced weight capacity if installed using hollow wall anchors.

Rail Diameter 1.25″ / 31.8mm (ADA Compliant)
Wall Clearance 1.50″ / 38.1mm (ADA Compliant)
Rail Width 12.1″ / 307mm
Rail Height 10.3″/ 262mm
Installation Mechanism Must screw to wood backing behind wall. Hollow wall anchors can be used when no wood structure is available (Note: Reduced weight capacity).
Installation Hardware/Fasteners Full Structure:#10 x 3″ / 76mm length, stainless steel wood screw (x4).

Hollow Walls (no structure):3/16-24 x 3″ / 76mm length, stainless steel bolt and hollow wall anchors (x4).

Fasteners Exposed or Concealed Concealed; Rail stems conceal mounting hardware.
Commercial Use Yes
Residential Use Yes
Water Resistant Yes
Rust Resistant Yes
Country of Origin China
Shipping Dimensions 14x13x4″ / 356x330x102mm
Shipping Weight 5lbs / 2.3kgs
Warranty Limited lifetime warranty

Accent Ring Technical Specifications


+ What is the weight capacity if I only have partial structure for mounting?

If there is partial structure for mounting (i.e. minimum one point fastens into structural wood and no structure available for other contact points), we recommend hollow wall anchors (supplied) for the contact points with no structure. This will reduce the weight capacity to 350lbs/159kg.

+ What is the weight capacity if I have no structure for mounting?

If there is no structure for mounting, we recommend hollow wall anchors (supplied) for all contact points. This will reduce the weight capacity to 200lbs/90.7kg.

+ What is the Limited Lifetime Warranty?

Products are covered by a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Warranty excludes damage caused by misuse, wood material and stain, accidental damage, alteration, normal wear and tear, or the use of corrosive or abrasive cleaning products. The manufacturer shall not be liable for indirect, consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. Total liability shall in no event exceed the purchase price of the goods. For complete warranty information, see the instructions for terms and conditions.


“Mounts solidly and gives my clients a sense of security in their shower!”

Chris in Saint Cloud, MN

“This rail is beautiful and well made in comparison to others in the market. It is great having such a practical item compliment the bathroom so well. I couldn't be happier with the design and the construction.”

Bernie in Chicago, IL

“I'm very pleased with the product's sturdiness and functionality. Blends in beautifully!”

Richard HB in Huntsville, AL