close button

Linear Bar

Invisia’s Linear Bar is a simple and understated way to add new life to the safety features of any bathroom. With a user-weight capacity that can support up to 500lbs / 227kgs, the decorative Linear Bar grants users peace of mind without compromising the beauty of the space. Featuring several colour options to complement décor, the luxurious Linear Bar can be installed anywhere—and at any angle—that support is needed.

MSRP: Starting at $179

Shop Local

Shop Online

SUBU – Safer You. Better You.

Grab Bar Specialists


ADA Compliant

Supports up to 500lbs / 227kgs when installed to structural wood backing (see below for details).

Flange cover conceals mounting screws

Makes mounting areas virtually invisible.

Vertical, horizontal or angled installation

Flange can rotate to accommodate wood stud spacing up to 16” / 406mm centers.


Back off set screws from wall flanges.

Linear Bar Instructions

Remove the rail and flange covers.

Linear Bar Instructions

Orient the first wall flange such that the set screw hole is facing downwards.

Linear Bar Instructions

Using wall flange as locating guide, notch the tile with center punch.

Linear Bar Instructions

Secure wall flange to wall with appropriate fasteners and waterproofing.

Linear Bar Instructions

Place the rail into the installed wall flange, and the second wall flange on other end of the rail.

Linear Bar Instructions

Mark off location of second flange and Repeat steps 4-5.

Linear Bar Instructions

Place rail and flange covers onto the wall flanges.

Linear Bar Instructions

Secure rail by tightening set screws.

Linear Bar Instructions

Install rubber plugs into flange covers.

Linear Bar Instructions

Inspect hardware regularly, and tighten if required.

Linear Bar Instructions


Material Stainless steel
Finish / Colour Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
Weight Capacity 500lbs / 227kgs (ADA Compliant)
Rail Diameter 1.25″ / 31.8mm (ADA Compliant)
Wall Clearance 1.50″ / 38.1mm (ADA Compliant)
Rail Lengths Linear Bar 12: 12″ / 305mm
Linear Bar 18: 18″ / 457mm
Linear Bar 24: 24″ / 610mm
Installation Mechanism Must screw to wood backing behind wall.
LB-18 aligns with 16″ / 406mm stud spacing.
Installation Hardware/Fasteners #10 x 2″ / 51mm length, stainless steel wood screws (x4).
Fasteners Exposed or Concealed Concealed; flange covers conceal mounting hardware.
Commercial Use Yes
Residential Use Yes
Water Resistant Yes
Rust Resistant Yes
Country of Origin China
Shipping Dimensions 27x4x4″ / 686x102x102mm
Shipping Weight 4lbs / 1.8kgs
Warranty Limited lifetime warranty

Linear Bar Technical Specifications


+ Can the rail be mounted in different positions?

Yes – if the Linear Bar is installed into studs or a secure wood structure, it can be installed vertically, horizontally or in at other angles to suit your need.

+ How does the Linear Bar install?

While the Linear Bar is 18” / 46cm in length, it installs into 16” / 41cm stud spacing.

+ What is the Limited Lifetime Warranty?

Products are covered by a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Warranty excludes damage caused by misuse, wood material and stain, accidental damage, alteration, normal wear and tear, or the use of corrosive or abrasive cleaning products. The manufacturer shall not be liable for indirect, consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. Total liability shall in no event exceed the purchase price of the goods. For complete warranty information, see the instructions for terms and conditions.